Skip to product information
1 of 5
  • Play video

ObsidianWire®

Lambertones HSS

Custom Lambertones HSS for Strat®

Regular price
$223.00 NZD
Regular price
Sale price
$223.00 NZD

Super Easy, Solder-less Install
Key Features:

  • A Lambertones // ObsidianWire™ Collab.
  • Custom built for HSS Strat®
  • TUNABLE SPLIT COIL (for fuller single coil sounds)
  • Pickup Matched Tone Controls (500k & 250k)
  • IGNEOS™ Firm Grip Pots
  • Fits Fender® HSS Strat®
  • Fits Squier® HSS Strat® with Adjustments


  • Hurry, only 13 items left in stock!

FAST SHIPPING

5 YEAR WARRANTY

ObsidianWire solderless install logo

Super Easy, Solder-less Install
All Obsidian® Pro-Wired Electronics are super easy to install, and allow for solder-less pickup changes with Obsidian® Plug, Play & Enjoy connectors. 

 

A Lambertones Pickups & ObsidianWire™ Colab. 

The Custom Lambertones HSS for Strat®

The Custom Lambertones HSS is the result of a design collaboration between Lambertones Pickups, and ObsidianWire, with a TUNABLE SPLIT COIL control for your humbucker, and Obsidians new range of super sturdy, 'Firm Grip' IGNEOS™ tone and volume controls.

TUNABLE ESC (COIL SPLIT) 

Turn your humbuckers in to single coils, and back again. To add true versatility to your guitar we build in TUNABLE SC, to split your humbucker to a single-coil for lower output, more dynamic tones.

For this harness Kurtis suggested we incorporate a resistor in series to ground on the push pull pot which gives a much warmer, fuller single coil sound than can be achieved with a standard split coil setup. 

We have taken this further by turning the idea in to a Coil Split 'Voice' control, which allows you to fine tune the amount of signal that is sent to ground.

  • 'QUIET' = FULL SPLIT (TRADITIONAL COIL SPLIT)
  • 'LOUD = SEMI SPLIT (LAMBERTONES SPLIT FOR FULLER SPLIT COIL)

TUNABLE SC is built in to your volume controls using push/pull pots, so no extra mods are required to your guitar.

- Requires split coil compatible humbuckers

CRYSTAL CLEAR TONE

Retain clarity at lower volumes. To make your tone crystal clear at lower volumes we include an Obsidian® Custom spec treble bleed mod. This prevents tone 'muddiness' at low volumes by allowing high frequencies to pass along a separate path to your amp, rather than being stopped short by the increasing resistance at the volume control.

CONTROL LAYOUT

Switching layout for the ObsidianWire Custom Lambertones for HSS Strat wiring

The 5 Way Switch

1: Bridge humbucker in full mode 
2: Bridge & Middle 
3: Middle 
4: Middle + Neck
5: Neck

The Tone Controls

Control 1: Master Volume
Control 2: Tone Control 1 (Neck & Middle Pickups) 250k to balance single coils
Control 3: Tone Control 2 (Bridge Pickup) 500k for a fuller humbucker

The Push/Pull Switch (Tone Control 2)

Tone control 2 is a dedicated coil split control for the humbucker. Use the Coil Split 'Voice' control to set the desired split level.

ObsidianWire custom Lambertones HSS wiring harness for Stratocaster with tune-able split coil and push pull pot
Custom Lambertones HSS for Strat®
Custom Lambertones HSS for Strat®
Custom Lambertones HSS for Strat®

The Lambertones Colab. Wiring for HSS Strat®

The Custom Lambertones HSS for Strat®

  • A Lambertones // ObsidianWire™ Collab.
  • Custom built for HSS Strat®
  • TUNABLE SPLIT COIL (for fuller single coil sounds)
  • Pickup Matched Tone Controls (500k & 250k)
  • IGNEOS™ Firm Grip Pots
  • Fits Fender® HSS Strat®
  • Fits Squier® HSS Strat® with Adjustments

Details

Description

ObsidianWire solderless install logo

Super Easy, Solder-less Install
All Obsidian® Pro-Wired Electronics are super easy to install, and allow for solder-less pickup changes with Obsidian® Plug, Play & Enjoy connectors. 

 

A Lambertones Pickups & ObsidianWire™ Colab. 

The Custom Lambertones HSS for Strat®

The Custom Lambertones HSS is the result of a design collaboration between Lambertones Pickups, and ObsidianWire, with a TUNABLE SPLIT COIL control for your humbucker, and Obsidians new range of super sturdy, 'Firm Grip' IGNEOS™ tone and volume controls.

TUNABLE ESC (COIL SPLIT) 

Turn your humbuckers in to single coils, and back again. To add true versatility to your guitar we build in TUNABLE SC, to split your humbucker to a single-coil for lower output, more dynamic tones.

For this harness Kurtis suggested we incorporate a resistor in series to ground on the push pull pot which gives a much warmer, fuller single coil sound than can be achieved with a standard split coil setup. 

We have taken this further by turning the idea in to a Coil Split 'Voice' control, which allows you to fine tune the amount of signal that is sent to ground.

  • 'QUIET' = FULL SPLIT (TRADITIONAL COIL SPLIT)
  • 'LOUD = SEMI SPLIT (LAMBERTONES SPLIT FOR FULLER SPLIT COIL)

TUNABLE SC is built in to your volume controls using push/pull pots, so no extra mods are required to your guitar.

- Requires split coil compatible humbuckers

CRYSTAL CLEAR TONE

Retain clarity at lower volumes. To make your tone crystal clear at lower volumes we include an Obsidian® Custom spec treble bleed mod. This prevents tone 'muddiness' at low volumes by allowing high frequencies to pass along a separate path to your amp, rather than being stopped short by the increasing resistance at the volume control.

CONTROL LAYOUT

Switching layout for the ObsidianWire Custom Lambertones for HSS Strat wiring

The 5 Way Switch

1: Bridge humbucker in full mode 
2: Bridge & Middle 
3: Middle 
4: Middle + Neck
5: Neck

The Tone Controls

Control 1: Master Volume
Control 2: Tone Control 1 (Neck & Middle Pickups) 250k to balance single coils
Control 3: Tone Control 2 (Bridge Pickup) 500k for a fuller humbucker

The Push/Pull Switch (Tone Control 2)

Tone control 2 is a dedicated coil split control for the humbucker. Use the Coil Split 'Voice' control to set the desired split level.

Specs

  • Potentiometers: OBSIDIAN® IGNEOS™ Firm Grip Pots (+/-10%) Split Shaft / 24 Spline
  • Capacitors: (150 Series Polyester Film 0.022uf) (+/-5%)
  • Switch: Obsidian® Oak® Propriety Switch (Requires Imperial / US Spec Tip)
  • Jack: Pro-Wired Switchcraft® J11 Mono // OR Pure Tone® Mono Multi-Contact 1/4 in

Compatibility

MADE TO FIT:

  • Fits: Fender® HSS Stratocaster® - Direct Fit // Right Hand Guitar Only
  • Fits: Squier® HSS Stratocaster® - Widen Control holes to 10mm & replace knobs
  • Always Check: Requires Minimum Cavity Depth around Push Pull Pot 29.2mm / 1.15"
  • Knobs: Requires US spec 24 spline knobs
  • Pickups: Built for HSS Strat® (Humbucker bridge pickup + two single coils.
  • Coil splitting: Requires compatible four conductor humbucker(s)

DOES NOT FIT:

  • Does NOT fit: Left Handed Guitars // Any guitar not described above

Install

For install help and other resources please go to our Info Hub.

Shipping

Where We Ship

We are currently shipping direct to:

  • United States
  • Australia
  • United Kingdom
  • New Zealand
  • Hong Kong
  • Iceland
  • Norway
  • Switzerland

For other countries - See International Dealers

United States

Standard Orders 

Ship from Michigan, USA

Please note that due to the way in-state taxes are collected, we cannot ship website orders within Michigan state. If you are based in Michigan, please order through our Amazon store here as this is set up to collect the required sales taxes. Apologies for any inconvenience caused.

Shipping method: Business days: Price (US$)
USPS TRACKED 3 - 5 6.99
FEDEX HOME DELIVERY 3 - 5 19.99
FEDEX EXPRESS SAVER 2 - 4 22.99
FEDEX EXPRESS SAVER 2 - 4 28.99

Pro-Wired Loaded Pickguards  

Ship Direct from Christchurch, New Zealand

All ObsidianWire™ Loaded pickguards are made to order and ship direct from our location in Christchurch, New Zealand. We have an expected build time of 6 - 12 business days, and will let you know if we expect any delays.

Rest of World

Ship Direct from Christchurch, New Zealand

We ship all orders outside of the United States from our location in Christchurch, New Zealand. Get shipping cost and delivery timeframes at checkout.

Taxes and duties

Obsidian® DOES NOT pay duties, taxes or customs clearance charges.
Duties and taxes charged by your local customs agency, will be your own responsibility.
If you live outside the USA, we recommend checking with your own country's customs agency what these may be prior to ordering. 
If you are concerned, consider ordering from dealer near you 
International Dealers

  • Solderless Install

    Super easy to install, and allow for solder-less pickup changes with Obsidian® Plug, Play & Enjoy connectors.

  • Pro-Grade Quality

    The absolute best guitar wiring upgrades, using custom specified parts and perfected techniques to ensure that your harness will be an upgrade for you and your guitar. Every time.

  • Greater Functionality

    Guitar electronics that will deliver a greater range of sounds from your pickups, with more switching options, and more dynamic setups to suit your guitar.

  • Improved Sound

    Guitar wiring that allows the full dynamic range of your pickups, and just as importantly, help find a harness that is matched to you.

Customer Reviews

Based on 4 reviews
100%
(4)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
N
Nicholas Neumann (Murray, US)
Install Time: 11 - 20 minutes
Build Quality:
Very bad
Excellent
Functionality:
Same as stock
Greater range of sounds
Sound:
Terrible
Amazing

Everything was perfect!

B
Brykk (Atlanta, US)
Install Time: 11 - 20 minutes
Build Quality:
Very bad
Excellent
Functionality:
Same as stock
Greater range of sounds
Sound:
Terrible
Amazing
Worth every dime

Put this kit into a squier hss cv70. I have a lot of time and money into this guitar and now id say this will be with me until i pass. The kit is super easy to install and works exactly like i wanted it to.

G
Geoffrey Wolgang (Commack, US)
Install Time: 1 Hour +
Build Quality:
Very bad
Excellent
Functionality:
Same as stock
Greater range of sounds
Sound:
Terrible
Amazing
GSW Review

So far so good. Easy to install, wiring was as simple as they tell you. Right now I have a hum from the middle pickup but I haven't had time to troubleshoot. Overall I am very have with the new sound of the Squire Strat that I modified.

D
Devan Bumstead (Newbury Park, US)
Install Time: 20 - 30 minutes
Build Quality:
Very bad
Excellent
Functionality:
Same as stock
Greater range of sounds
Sound:
Terrible
Amazing
Loving this tunable split feature!

I’m a huge Obsidian Wire fan and use their harnesses in every one of my guitars that can take them. I’ve never been disappointed in quality and features. Installation is fast and fun and it’s great to know for sure that after a pickup install, everything is just going to work without headache. I love to solder, but I’d much rather just get to playing when it comes to my pickups. Obsidian makes it happen. This particular harness is genius. Having the ability to fine tune the split bridge is such a welcome feature and truly does make a difference, giving me much more convincing "single coil" tones out of my humbucker. I'm very impressed by this harness!

Judge.me YouTube video placeholder